Une p'tite idée pour le Mirage 5F de Ludo...
Une p'tite idée pour le "Pit" du Mirage 5F
#1Bonsoir,
... pour faire plus "frenchy", j'ai eu l'idée d'intégrer la "boule" dans le cockpit du Nesher (Thirdwire) utilisé dans le joli mod de Ludo!
Si cela vous intéresse et si cela est possible d'un point de vue des droits d'auteur, je pourrais l'uploader sur C6!
Je n'ai pas trouvé de bonnes images du "pit" du "5F" pour tenter de paufiner l'instrument central typique, affiner les graduations de la "boule"
par rapport à son "support"...
Komrad.
[ATTACH]26067[/ATTACH]
... pour faire plus "frenchy", j'ai eu l'idée d'intégrer la "boule" dans le cockpit du Nesher (Thirdwire) utilisé dans le joli mod de Ludo!
Si cela vous intéresse et si cela est possible d'un point de vue des droits d'auteur, je pourrais l'uploader sur C6!
Je n'ai pas trouvé de bonnes images du "pit" du "5F" pour tenter de paufiner l'instrument central typique, affiner les graduations de la "boule"
par rapport à son "support"...
Komrad.
[ATTACH]26067[/ATTACH]
-
- Mécano au sol
- Messages : 445
- Inscription : 26 janvier 2007
#2
http://www.airliners.net/photo/France-- ... 0522184/L/
No problem with uploading modified textures, only core files like the .LOD is a no go.
No problem with uploading modified textures, only core files like the .LOD is a no go.
#4
Oui
Thank's to Jollyjumper for the Mirage5F pîcture
Thank's to Jollyjumper for the Mirage5F pîcture
"Tu as peur, Boyington, tu refuses le combat" (Tomio Arachi).
#5
Bonjour,
Thank you Jollyjumper for your help!
Je vous prépare ma p'tite modif initiale pour la proposer en Biblio...
... après un passage sous Photoshop.
Grâce à la photo de Jollyjumper, il doit peut-être possible d'aller plus loin!
A plus,
Komrad.
[ATTACH]26069[/ATTACH]
Thank you Jollyjumper for your help!
Je vous prépare ma p'tite modif initiale pour la proposer en Biblio...
... après un passage sous Photoshop.
Grâce à la photo de Jollyjumper, il doit peut-être possible d'aller plus loin!
A plus,
Komrad.
[ATTACH]26069[/ATTACH]
#6
Apparemment, les Mirage5F disposaient d'un rwr simplifié : Thomson BZ, vous l'avez sur la photo de "airliner" ?
J'avais initié un sujet sur le matos ECM du Mirage 5F, on peut peut être envisager une version "85+" avec lance leurres ?
J'avais initié un sujet sur le matos ECM du Mirage 5F, on peut peut être envisager une version "85+" avec lance leurres ?
"Tu as peur, Boyington, tu refuses le combat" (Tomio Arachi).
-
- Mécano au sol
- Messages : 445
- Inscription : 26 janvier 2007
#7
When we discussed the M5F for TMF, I remember that BPAo had all the good books.. he told us that the M5F never received any kind of RWR accordingly to his sources,
Still, perhaps some aircraft have been fittet with the BZ ... it gave rear hemisphere warning only
CM was carried externally:
Phimat Chaff pod, ~210 chaff packets
Lacroix flare dispenser mounted into the parabrake housing, 14 cartridges (possible with 2 flares per cartridge = 28 total ... info on this varies...)
~
Edit 2:
Another source I have says that Lacroix cartridges have 3 flares or chaff packets per cartridge, so you can have up to 42 flares if
you go for a flares only setup for the parabrake housing dispenser
Leaves much room for many combinations...
~
Still, perhaps some aircraft have been fittet with the BZ ... it gave rear hemisphere warning only
CM was carried externally:
Phimat Chaff pod, ~210 chaff packets
Lacroix flare dispenser mounted into the parabrake housing, 14 cartridges (possible with 2 flares per cartridge = 28 total ... info on this varies...)
~
Edit 2:
Another source I have says that Lacroix cartridges have 3 flares or chaff packets per cartridge, so you can have up to 42 flares if
you go for a flares only setup for the parabrake housing dispenser
Leaves much room for many combinations...
~
#8
Je viens d' "uploader" le fichier!
Il doit falloir patienter pour qu'il soit validé.
Peut-être pourrons-nous utiliser aussi le cockpit du Mirage 5BA (DLC) que prépare TK?
A plus,
Komrad.
Il doit falloir patienter pour qu'il soit validé.
Peut-être pourrons-nous utiliser aussi le cockpit du Mirage 5BA (DLC) que prépare TK?
A plus,
Komrad.
-
- Mécano au sol
- Messages : 445
- Inscription : 26 janvier 2007
#9
The M5BA cockpit is different, the 5BA has a different instrument layout etc..
http://www.airliners.net/photo/Belgium- ... /0580975/L
http://www.airliners.net/photo/Belgium- ... /0580975/L
-
- Mécano au sol
- Messages : 445
- Inscription : 26 janvier 2007
#10
Dont have the files yet, but a small suggestion for a further improvement:
on the right area, there are the 2 "blind panels" where space is reserved for the RWR display and Threat Type Indicator,
you could copy and paste some screws into every corner of the panels... looks better
on the right area, there are the 2 "blind panels" where space is reserved for the RWR display and Threat Type Indicator,
you could copy and paste some screws into every corner of the panels... looks better
#12
Yes, according to my sources, most were equipped as such (Mirage 5F), see also linked discussionJollyJumper a écrit :When we discussed the M5F for TMF, I remember that BPAo had all the good books.. he told us that the M5F never received any kind of RWR accordingly to his sources,
Still, perhaps some aircraft have been fittet with the BZ ... it gave rear hemisphere warning only
After 1985, most french aircraft were eqquipped with at least Lacroix cartridge in the parabreak housing.JollyJumper a écrit : CM was carried externally:
Phimat Chaff pod, ~210 chaff packets
Lacroix flare dispenser mounted into the parabrake housing, 14 cartridges (possible with 2 flares per cartridge = 28 total ... info on this varies...)
~
Edit 2:
Another source I have says that Lacroix cartridges have 3 flares or chaff packets per cartridge, so you can have up to 42 flares if
you go for a flares only setup for the parabrake housing dispenser
"Tu as peur, Boyington, tu refuses le combat" (Tomio Arachi).
#13
JollyJumper a écrit :Dont have the files yet, but a small suggestion for a further improvement:
on the right area, there are the 2 "blind panels" where space is reserved for the RWR display and Threat Type Indicator,
you could copy and paste some screws into every corner of the panels... looks better
Hello JollyJumper,
I've begun some modifications thanks to your picture and I've this result... the mesh must be the same!
Bonne nuit à tous...
Komrad.
[ATTACH]26071[/ATTACH]
-
- Mécano au sol
- Messages : 445
- Inscription : 26 janvier 2007
#14
Urgh.. yeah, same mesh for both blind panels... so dont add any gauges.
Better leave it as it is then.
Better leave it as it is then.
#15
JollyJumper a écrit :Urgh.. yeah, same mesh for both blind panels... so dont add any gauges.
Better leave it as it is then.
Ok JollyJumper!
If we could know these mesh names to delete them and we could work
directly on the main panel!
Concernant mon upload,... j'ai dû faire une erreur!
Une petite évolution... avec quelques "modif" extraites de l'image de JollyJumper.
[ATTACH]26120[/ATTACH]
Komrad.