Re: Update DCS M2000C
Publié : dim. juil. 31, 2016 9:01 pm
De quelle version parles tu ? Parce que sur la 2.0.3 les magics sont corrigés.
Chez moi les magics à droite ne partent pas sur la version 2.0.3diditopgun a écrit :De quelle version parles tu ? Parce que sur la 2.0.3 les magics sont corrigés.
Ok. There has been a SNAFU and the bins that have been delivered today are just the 1.5.4 version of the 2.0.3 bins. These are old bins with the 2.0.3 bugs. The fixes are not there.
So, basically 1.5.4 now has the "Super Radar".
I guess we will have to wait for the next release.
I knew something was wrong when I checked the updated folders and something was missing. I rechecked with the delivered package to ED and the fixes are there.
ED released an old package. Gosh! I hate when that happens.
My apologies to you all for this FUBAR.
You all get the 2.0.3 bugged version. ED released an old package.
Malheureusement c'est ED qui gère les mises à jour. Et quand ils ne livrent pas la dernière version (ce qui s'est passé ici) ce sont les joueurs qui en pâtissent.diditopgun a écrit :C'est surtout qu'ils pourraient corriger le tir en uploadant le bon package avec un hot fix mais non ils vont attendre une ou deux semaine selon la version pour corriger....
Excellent ! (si tout fonctionne bien comme annoncé)This is the latest changelog:
HUD
- Added AP router indicator
- Fixed horizon line behavior
- Fixed Ground track indicator fixed
- Fixed heading tape jumping around 0 degrees
- Fixed To/From House behavior
- Fixed ILS/App symbology behavior
- Fixed pitch ladder so it moves with FPM
- Fixed pitch ladder movement bounds
- Fixed FPM movement bounds
- Fixed accel chevrons behavior
OTHER
- Added functionality to backup Attitude Indicator
- Updated Rlaxoxo Sound Mod to v7
- Updated STT target logic
- Updated INS navigation
- Updated IP behavior (WIP)
- Updated MAGIC lock tone
- Updated EFM extrame envelope modeling
- Updated EFM aerodynamic distrubance and separation modeling
- Updated EFM yaw control and side force modeling
- Updated VTB STT display for CCM
- Updated keyboard/joystick bindings (community)
- Fixed weapon gaps on pylons (community)
- Fixed weapon stores relase failure due to excessive G-load
- Fixed AB Cutoff not disabling when closed with cover
- Fixed FBW Emergency mode not disabling when closed with cover
- Fixed brakes not holding aircraft still to MIL power
- Fixed TDC vs. Bullseye coordinates
- Fixed OBL INS Update bug
- Fixed PCA Select bug
- Fixed MAGIC Select bug
- Fixed BAD L/G input bug
- Fixed varous VTB, PCA, Radar bugs
- Fixed engine sound stutter issues
- Fixed Brazilian livery typo
- Fixed typo in Free Flight mission
- Fixed laser code bounds in mission editor
- Fixed AP Test not working
- Fixed incorrect yellow caution sound
- Fixed super radar
- Fixed dropping contacts when out of STT range
- Removed MAGIC seek tone, need to add MAGIC TIR tone
Pending
•Added HUD AP FPM cude (WIP)
•Added IP Attack mode (WIP)
•Added TD/TOP
•Added Magic Clear
•Added idle and afterburner detents to controls indicator
•Added barometric setting on mission initialization
•Updated ALT AFF (Select Alt) logic based on new info
•Updated free flight mission for TD/TOP training
•Updated some AP behaviors, still being worked on
•Updated HUD G indicator only to tenths
•Fixed IP Bombing Navigation and VTB information display
•Fixed INS ΔL/ΔG input
•Fixed INS ALT PREP 00 display
•Fixed STT-IFF bug
•Fixed HUD inverted T shows in app mode and with main weight on wheels
•Fixed AOA limiter issue that could cause oscillations in some situations
•Fixed Pitch dampening to remove uncommanded pitch when stick centered
•Fixed EFM old source code commit issue
•Fixed HUD heading scale
•Fixed HUD pitch scaling in APP mode
•Fixed FPM marker texture location
•Fixed barometric adjust affecting ADI caging
•Fixed some crashes due to old missions not having new laser code implementation
•Fixed gear now allowed to drop with EP HYD on
INS Based bombing is now ready for testing:
1. It is available for all bombs (not rockets or guns)
2. Like normal mode, release mode is controlled by bomb type.
3. You need both a waypoint and an offset. The target will be located on the offset. If no offset exists, then you won't be able to use this mode.
4. For CCRP Mode, you don't need to mark the target. The target is preselected for you. Again the waypoint offset is the target. The target you want to destroy MUST be at the center of the waypoint offset position.
5. For CCIP Mode, you only need to fly towards the offset waypoint. The only difference is that the waypoint elevation will be target elevation. The target may not be in the center of the offset position.
5. INS based bombing requires a lot of planification BEFORE starting the flight.
How to use INS based bombing (IP bombing):
a. Select the bombs
b. Set master arm on. The PCA will change to AG Attack mode.
c. Set radar to TAS. Do not forget to set the radar to EMission.
d. Click on RS for backup. Do not forget to turn the radar altimeter on in the HUD.
d. Click on the PI button in the PCA. The following will happen:
d.1. The waypoint will become the IP (Initial Point == PI Point Initial) for the bombing run.
d.2. The INS will continue giving steering cues towards the Waypoint/IP.
d.3. A radar aiming point will appear. This aiming point is for INS update purposes not for target selection.
d.4. It is recommended to do an INS update when getting near the IP. Just point the radar aiming point to the IP and click the "Magic Slave/AG Designate/INS Position Update" HOTAS button.
d.5 DO NOT CLICK THE VAL BUTTON IN THE INS PANEL. The update is automatic.
d.6. Upon reaching the IP the INS will switch towards the Offset/Target position.
d.7. For CCRP Only: The steering error wings will appear around the FPM.
d.8. Fly towards the Offset/Target Position.
d.9 For CCRP: The bomb cue will appear. Click the bomb release and keep it pressed until the cue crosses the FPM. Bombs will be released automatically.
d.10 For CCIP: Click the bomb release as soon as the CCIP cue is over the target.
d.11. You can click either the VAL (save) or REC (reject) buttons for the INS update.
These instructions can be changed in the future.
Fonctionnait déjà avant, j'en ai fait ces 15 derniers jours...diditopgun a écrit :QR_BBPOST Par contre le recalage de la centrale en mode OBL fonctionne enfin !!!