Check-Six Forums

Bonsoir,

... pour faire plus "frenchy", j'ai eu l'idée d'intégrer la "boule" dans le cockpit du Nesher (Thirdwire) utilisé dans le joli mod de Ludo!

Si cela vous intéresse et si cela est possible d'un point de vue des droits d'auteur, je pourrais l'uploader sur C6!

Je n'ai pas trouvé de bonnes images du "pit" du "5F" pour tenter de paufiner l'instrument central typique, affiner les graduations de la "boule"
par rapport à son "support"...

Komrad.

[ATTACH]26067[/ATTACH]

http://www.airliners.net/photo/France-- ... 0522184/L/

No problem with uploading modified textures, only core files like the .LOD is a no go.

Pas une mauvaise idée ça...

Ludo

Oui
Thank's to Jollyjumper for the Mirage5F pîcture

Bonjour,

Thank you Jollyjumper for your help!

Je vous prépare ma p'tite modif initiale pour la proposer en Biblio...

... après un passage sous Photoshop.

Grâce à la photo de Jollyjumper, il doit peut-être possible d'aller plus loin!

A plus,

Komrad.

[ATTACH]26069[/ATTACH]

Apparemment, les Mirage5F disposaient d'un rwr simplifié : Thomson BZ, vous l'avez sur la photo de "airliner" ?

J'avais initié un sujet sur le matos ECM du Mirage 5F, on peut peut être envisager une version "85+" avec lance leurres ?

When we discussed the M5F for TMF, I remember that BPAo had all the good books.. he told us that the M5F never received any kind of RWR accordingly to his sources,

Still, perhaps some aircraft have been fittet with the BZ ... it gave rear hemisphere warning only
CM was carried externally:
Phimat Chaff pod, ~210 chaff packets
Lacroix flare dispenser mounted into the parabrake housing, 14 cartridges (possible with 2 flares per cartridge = 28 total ... info on this varies...)

~

Edit 2:
Another source I have says that Lacroix cartridges have 3 flares or chaff packets per cartridge, so you can have up to 42 flares if
you go for a flares only setup for the parabrake housing dispenser

Leaves much room for many combinations...
~

Je viens d' "uploader" le fichier!

Il doit falloir patienter pour qu'il soit validé.

Peut-être pourrons-nous utiliser aussi le cockpit du Mirage 5BA (DLC) que prépare TK?

A plus,

Komrad.

The M5BA cockpit is different, the 5BA has a different instrument layout etc..
http://www.airliners.net/photo/Belgium- ... /0580975/L

Dont have the files yet, but a small suggestion for a further improvement:
on the right area, there are the 2 "blind panels" where space is reserved for the RWR display and Threat Type Indicator,
you could copy and paste some screws into every corner of the panels... looks better

Ok Jollyjumper! I see...

Komrad

JollyJumper a écrit :When we discussed the M5F for TMF, I remember that BPAo had all the good books.. he told us that the M5F never received any kind of RWR accordingly to his sources,

Still, perhaps some aircraft have been fittet with the BZ ... it gave rear hemisphere warning only

Yes, according to my sources, most were equipped as such (Mirage 5F), see also linked discussion

JollyJumper a écrit : CM was carried externally:
Phimat Chaff pod, ~210 chaff packets
Lacroix flare dispenser mounted into the parabrake housing, 14 cartridges (possible with 2 flares per cartridge = 28 total ... info on this varies...)

~

Edit 2:
Another source I have says that Lacroix cartridges have 3 flares or chaff packets per cartridge, so you can have up to 42 flares if
you go for a flares only setup for the parabrake housing dispenser

After 1985, most french aircraft were eqquipped with at least Lacroix cartridge in the parabreak housing.

JollyJumper a écrit :Dont have the files yet, but a small suggestion for a further improvement:
on the right area, there are the 2 "blind panels" where space is reserved for the RWR display and Threat Type Indicator,
you could copy and paste some screws into every corner of the panels... looks better

Hello JollyJumper,

I've begun some modifications thanks to your picture and I've this result... the mesh must be the same!

Bonne nuit à tous...

Komrad.

[ATTACH]26071[/ATTACH]

Urgh.. yeah, same mesh for both blind panels... so dont add any gauges.
Better leave it as it is then.

JollyJumper a écrit :Urgh.. yeah, same mesh for both blind panels... so dont add any gauges.
Better leave it as it is then.

Ok JollyJumper!

If we could know these mesh names to delete them and we could work
directly on the main panel!

Concernant mon upload,... j'ai dû faire une erreur!

Une petite évolution... avec quelques "modif" extraites de l'image de JollyJumper.

[ATTACH]26120[/ATTACH]


Komrad.